AMETEK

MX 시리즈 AC/DC 전원공급기 [AMETEK] 파워서플라이

제품특징
  • AC/DC 겸용
  • 확장 전원 레벨(15kVA~135kVA)
  • Voltage: 150V - 400V
  • Current: 0A - 375A / phase
  • Power: 15kVA - 135kVA
  • 트랜지언트, 임의파형 생성기능
  • 표준: RS232C&USB, 옵션: GPIB&LAN

The California Instruments MX Series consists of multiple high power AC and DC power systems that provide controlled AC and DC output for ATE and product test applications.


This high power AC and DC test system covers a wide spectrum of AC and DC power applications at an affordable cost. Using state-of-the-art PWM switching techniques, the California Instruments MX series combines compactness, robustness and functionality in a compact floor-standing chassis, no larger than a typical office copying machine. This higher power density has been accomplished without the need to resort to elaborate cooling schemes or additional installation wiring. Simply roll the MX15, MX22.5, MX30, or MX45 unit to its designated location (using included casters), plug it in, and the MX series is ready to work for you.

Simple Operation
The MX Series can be operated completely from its menu driven front panel controller. A backlit LCD display shows menus, setup data, and read-back measurements. IEEE-488, RS232C, USB and LAN remote control interfaces and instrument drivers for popular ATE programming environments are available. This allows the MX Series to be easily integrated into an automated test system.

For advanced test applications, the programmable controller version offers full arbitrary waveform generation, time and frequency domain measurements, and voltage and current waveform capture.

Configurations
The MX15 delivers up to 15 kVA of single phase output. The MX22.5, MX30 and MX45 deliver up to 22.5 kVA, 30 kVA and 45 kVA, respectively. These operate using single or three phase output in AC or AC+DC mode. In DC mode, 50% of the AC power level is available.. On MX-P models, AC+DC mode is also supported.

For higher power requirements, the MX90 and MX135 models are available. Multi cabinet MX45 systems always operate in three phase output mode. Available reconfigurable MX90 and MX135 models (-MB designation) provide
multiple controllers which allow separation of the high power system into two or three individual MX45 units for use in separate applications. This ability to reconfigure the system provides an even greater level of flexibility not commonly found in power systems.

Product Evaluation and Test
Increasingly, manufacturers of high power equipment and appliances are required to fully evaluate and test their products over a wide range of input line conditions. The built-in output transient generation and read-back measurement capability of the MX Series offers the convenience of a powerful, and easy to use, integrated test
system.

Features And Benefits
Key Features
  • High Power AC and DC Power Source
    • Programmable AC and DC power for frequency conversion and product test applications
  • Expandable Power Levels
    • Available output power of 15, 22.5, 30, and 45 kVA per unit and multi-unit configurations for power
      requirements up to 135 kVA and above
  • Single and Three Phase Mode
    • Phase mode programming on MX22.5-3Pi, MX30-3Pi and MX45-3Pi allows switching between single and
      three phase output modes
  • Arbitrary & Harmonic Waveform Generation
    • User defined voltage waveform and distortion programming
  • Regenerative, bidirectional “Green” Power Solution
    • Automatic crossover between Source and Sink power mode offers regenerative capabilities in AC
      mode. Regenerate up to 100% of the rated output power back to the utility grid during sink mode
      operation. ( -SNK option )
  • Remote Control
    • Standard RS232C & USB along with optional IEEE- 488 & LAN Interfaces are available for automated
      test applications

California Instruments MX Series : Specifications

Operating Modes

Standard

AC or DC

Pi Version

AC, DC and AC+DC

 

AC Mode Output

Frequency

Range: 16.00-819.0 Hz, -LF Option: 16.00-500.0 Hz, -HF Option: 16.00-905 Hz (supplemental specifications apply above 819 Hz). Resolution: 0.01 Hz: 16.00 - 81.91 Hz, 0.1 Hz: 82.0 Hz - 819.1 Hz,

Phase Outputs

MX15-1/15-1Pi: 1, MX22.5/30/45-3Pi: 1 or 3 switchable, Neutral: Floating, Coupling: DC (except for -HV option)

Total Power

MX15-1/1Pi: 15 kVA, MX22.5-1/3 : 22.5 kVA, MX30-1/3: 30 kVA, MX45-1/3: 45 kVA, MX90: 90 kVA, MX135: 135 kVA

Load Power Factor

0 to unity at full output current

 

AC Mode Voltage

Voltage Ranges

Range

VLow

VHigh

AC

0-150 V

0-300 V

AC+DC

0-150 V

0-300 V

Load Regulation

< 0.25 % FS DC to 100 Hz, < 0.5 % FS 100 Hz to 819 Hz

Line Regulation

< 0.1% FS for 10 % line change

External Sense

Voltage drop compensation (5% Full Scale)

Harmonic Distortion (Linear)

Less than 0.5% from 16 - 66 Hz, Less than 1% from 66 - 500 Hz, Less than 1.25% above 500 Hz

DC Offset

< 20 mV

External Amplitude Modulation

Depth: 0 - 10 %, Frequency: DC - 2 KHz

Voltage slew rate

200 μs for 10% to 90% of full scale change into resistive load

 

AC Mode Current

Models

Steady State AC Current @ FS V

V Low

V High

MX15-1

100

50

MX15-1Pi

100

50

MX22.5-3Pi / 1Pi

50/ø / 150

25/ø / 75

MX30-1

200

100

MX30-3

66.6/ø

33.3/ø

MX30-3Pi / 1Pi

66.6/ø / 200

33.3/ø / 100

MX45-1

300

150

MX45-3

100/ø

50/ø

MX45-3Pi / 1Pi

100/ø / 300

50/ø / 150

MX90-3/Pi

200/ø

100/ø

MX135-3/Pi

300/ø

150/ø

Note: Constant power mode provides increased current at reduced voltage. See chart below

Peak Repetitive AC Current

Up to 3.6 x rms current at full scale voltage

Programming Accuracy

Voltage (rms): ± 0.3 Vrms, Frequency: ± 0.01 % of programmed value, Current Limit: - 0 % to + 5 % of programmed value + 1A, Phase: < 0.5° + 0.2°/ 100 Hz with balanced load

Programming Resolution

Voltage (rms): 100 mV, Frequency: 0.01 Hz from 16 - 81.91 Hz, 0.1 Hz from 82.0 - 819 Hz, Current Limit: 0.1 A, 3 phase mode, 1.0 A, 1 phase mode, Phase: 0.1°

 

Constant Power AC Mode

 

Measurements - Standard

Parameter

Range

Accuracy* (±)

Resolution*

Frequency

16-100 Hz
100-820 Hz

0.01% + 0.01 Hz
< 100 Hz 100 - 500 Hz

0.01 Hz / 0.1 Hz

RMS Voltage

0-400 V

0.05 V + 0.02%
0.1 V + 0.02%

10 mV

RMS Current

0-160 A

0.15 A + 0.02%
0.3 A + 0.02%

10 mA

Peak Current

0-400 A

0.15 A + 0.02%
0.3 A + 0.02%

10 mA

Crest Factor

0.00-6.00

0.05
0.05

0.01

Real Power

0-15 kW

30 W + 0.1%
60 W + 0.1%

10 W

Apparent Power

0-15 kVA

30 VA + 0.1%
60 VA + 0.1%

10 VA

Power Factor

0.00-1.00

0.01
0.02

0.01

Phase

0.0-360.0

2.0°
3.0°

0.1°

DC Voltage

0-400 V

0.5 V

10 mV

DC Current

0-160 A

0.5 A

10 mA

Power

0-15 kW

0.15 kW

10 W

* Measurement system bandwidth = DC to 6.7 kHz. Accuracy specifications are valid above 100 counts. Current and Power Accuracy and Range specifications are times three for MX90, MX135 or MX30/45-3Pi in single phase mode. PF accuracy applies for PF > 0.5 and VA > 50 % of range

 

Measurements - Harmonics (Pi controller only)

Parameter

Frequency Fundamental Harmonics

Phase

Voltage

Current

Range

16.00-1000.0 Hz /
32.00 Hz - 16 kHz

0.0 - 360.0°

Fundamental
Harmonics 2 - 50

Fundamental
Harmonics 2 - 50

Accuracy* (±)

0.03% + 0.03 Hz /
0.01 Hz

2° typ.

750 mV 0.3% + 750
mV+0.3% /1 kHz

0.5 A / 0.3% + 150 mA
+0.3% /1 kHz

Resolution

0.01 Hz

0.5°

10 mV / 10 mV

100 mA / 100 mA

* Accuracy specifications are valid above 100 counts. Accuracy specifications are for three phase mode. Harmonics frequency range for MX30/45-3Pi in single phase mode is 32 Hz - 48 kHz

DC Mode Output

Power

Max DC power at full scale of DC voltage range. MX15-1Pi: (10 kW), MX22.5-3Pi : (5 kW per output, 3 outputs. 15 kW in 1 channel mode, MX30-3Pi: (6.5 kW per output, 3 outputs. 20 kW in 1 channel mode), MX45-3Pi: (10 kW per output, 3 outputs. 30 kW in 1 channel mode)

Voltage Ranges

Low (0 - 200 V), High (0 - 400 V)

Output Accuracy

± 1 Vdc

Load Regulation

< 0.25 % FS

Line Regulation

< 0.1% FS or 10 % line change

Ripple

< 2 Vrms Lo Range, < 3 Vrms Hi Range

Current Limit

Programmable from 0 A to max. current for selected range.

Max DC Current @ FSV per output

Model

V Low

V High

MX15-1

50

25

MX15-1Pi

50

25

MX22.5-3Pi / 1Pi

25 / 75

12.5 / 37.5

MX30-1

100

50

MX30-3

33.3

16.6

MX30-3Pi / 1Pi

33.3 / 100

16.6 / 50

MX45-1

150

75

MX45-3

50

25

MX45-3Pi / 1Pi

50 / 150

25 / 75

MX90-3/Pi

100

50

MX135-3/Pi

150

75

 

AC+DC Mode Output

Output Power (Pi only)

Maximum current and power in AC+DC mode is same as DC mode

 

Protection

Over Load

Constant Current or Constant Voltage mode

Over Temperature

Automatic shutdown

 

Storage

Non Volatile Mem. storage

16 instrument setups, 200 user defined waveforms [Pi only]

 

Waveforms

Waveform Types

Std: Sine, Pi: Sine, Square, Clipped sine, User defined

User defined waveform
storage (Pi version)

Four groups of 50 user defined arbitrary waveforms of 1024 points for a total of 200. One group can be active at a time

 

System Interface

Inputs

Remote shutdown, External Sync, Clock/Lock (option on Pi)

Outputs

Function Strobe / Trigger out, Clock/Lock (option on Pi)

 

Remote Control (Pi only/standard with -P option)

IEEE-488 Interface

IEEE-488 (GPIB) talker listener. Subset: AH1, C0, DC1, DT1, L3, PP0, RL2, SH1, SR1, T6, IEEE-488.2 SCPI Syntax

RS232C Interface

9 pin D-shell connector (Supplied with RS232C cable)

Output Relay

Push button controlled or bus controlled output relay

Output impedance

Programmable Z available on MX30-3Pi and MX45-3Pi in 3 phase mode only. Specifications apply at 50 Hz fundamental. Resistive: 1 - 200 mOhm, Inductive: 170 - 200 uH

 

AC Input

Voltage

Must be specified at time of order. All inputs are L-L, 3ø, 3 wire + Gnd. 208 ± 10% VAC, 230 ± 10% VAC, 400 ± 10% VAC, 480 ± 10% VAC

Input Line Current (per phase)

Current (MX15)

V L-L

St State

208

58.3 ARMS

230

52.3 ARMS

400

30 ARMS

480

25 ARMS

Current (MX22.5/30/45)

V L-L

St State

208

89/116/175 ARMS

230

79/105/157 ARMS

380

49/64/95 ARMS

400

46/60/90 ARMS

480

38/50/75 ARMS

Distortion: < 8 % at full power < 20 % below 35 % of power

Line Frequency

47 - 63 Hz

Efficiency

85 % typical

Power Factor

0.95 typical

 

AC Service

Inputs/Outputs

MX30/MX45: Front access, cables routed through rear panel, exit in back. MX15: Rear Access

Regulatory

IEC61010, EN50081-2, EN50082-2, CE EMC and Safety Mark requirements

EMI

CISPR 11, Group1 , Class A

Connectors

AC Input & Output terminal block behind front cover, IEEE-488 (GPIB) connector (rear panel), 9 pin D-Shell RS232C connector*, (rear panel), Remote voltage sense terminal block (rear panel), System Interface Connector, DB-37 (rear panel). *RS232 DB9 to DB9 cable supplied

 

Physical Dimensions

MX30/MX45 Dimensions

Height: 50.0” (1270 mm), Width: 28.75” (731 mm), Depth: 34.5” (876 mm)

MX30/MX45 Weight

Chassis: Net: 1150 lbs / 522 Kg, Shipping: 1231 lbs / 560 Kg, Amp Module: Net: 63 lbs / 29 Kg

MX15 Dimensions

Height: 31.75” (806 mm), Width: 24.0” (610 mm), Depth: 28.0” (711 mm)

MX15 Weight

Chassis: Net: 600 lbs / 272 Kg, Shipping: 681 lbs / 309 Kg, Amp Module: Net: 63 lbs / 29 Kg

Chassis

MX30/MX45: Casters and forklift openings. MX15: Casters

Vibration and Shock

Designed to meet NSTA project 1A transportation levels. Units are shipped in wooden
crate with forklift slots

Air Intake/Exhaust

Forced air cooling, front air intake, rear exhaust

Operating Humidity

0 to 95 % RAH, non condensing

Temperature

Operating: 0 to 40° C (30° C max in CP mode), Storage: -20 to +85° C


Standard controller versions with single voltage range

ModelAC Output PowerPhase OutputsAC/DC Voltage RangeController
MX15-115kVA1150/200 & 300/400Standard
MX30-130 kVA1150/200 & 300/400Standard
MX30-330 kVA3150/200 & 300/400Standard
MX45-145 kVA1150/200 & 300/400Standard
MX45-345 kVA3150/200 & 300/400Standard
MX90-390 kVA3150/200 & 300/400Standard
MX135-3135 kVA3150/200 & 300/400Standard
Programmable controller versions with dual voltage ranges
ModelAC Output PowerPhase OutputsAC/DC Voltage RangeController
MX15-1Pi15kVA1150/200 & 300/400Programmable
MX30-3Pi30 kVA1 & 3150/200 & 300/400Programmable
MX45-3Pi45 kVA1 & 3150/200 & 300/400Programmable
MX90-3Pi90 kVA3150/200 & 300/400Programmable
MX135-3Pi135 kVA3150/200 & 300/400Programmable
Pi models include IEEE-488 and RS232C interfaces, Advanced measurements, arbitrary waveform generation. Phase mode switching
on MX-30/45-3Pi.
Reconfigurable Power Systems
ModelAC Output PowerPhase OutputsAC/DC Voltage RangeController
MX90-3Pi-MB90 kVA3150/200 & 300/400Dual MX45-3Pi
MX135-3Pi-MB135 kVA3150/200 & 300/400Triple MX-45-3Pi
Reconfigurable systems can be separated into stand-alone MX45-3Pi models or combined for higher power levels.
Controller Options
Specify output range on standard models. All range values shown are Line to Neutral.
Option CodeDescription
-150Configured for 150 V AC and 200 V DC output ranges.
-300Configured for 300 V AC and 400 V DC output ranges.
-LFLimits maximum frequency to 500 Hz.
-FCModifies output frequency control to ± 0.25%
-PIEEE-488 and RS232C Interface option. Adds programming, Windows software and RS232 Cable.
-HFIncreases maximum frequency to 905 Hz.
-RRange change. Provides both 150/200 and 300/400 AC/DC output ranges (Std. on MX15).
Pi Model Options
Option CodeDescription
-411*IEC 1000-4-11 test firmware.
-413*IEC 1000-4-13 Harmonics & Interharmonics test firmware.
-HVAdds 400 V AC-only output range
-LFLimits max. frequency to 500 Hz
-HFIncreases max. frequency to 1000 Hz
-XVAdds other AC-only output range. Consult factory
-LKMClock/Lock Master
-LKSClock/Lock Auxiliary
-WHMWatt-Hour Measurement option

Note: See Avionics brochure for details * Not applicable on MX15

Avionic Test Routine Options
-ABDABD0100.1.8 Test Option.
-AMDAirbus AMD24 Test
-A350Airbus Test Software
-B787Boeing 787 Test Software
-160RTCA/DO-160D, DO-160E, and EUROCAE test firmware.
-704Mil Std 704 A - F test - firmware/ software.
* Note Reference the Avionics Test User Manual P/N 4994-971 for a complete listing of performance capabilities.
AC Mode Current
ModelsStdPi
AC modeXX
DC modeXX
AC+DC mode-X
Dual V RangeOption (Std / MX15)X
Transient programmingXX
Arbitrary waveforms-X
MeasurementsXX
Harmonic measurements-X
Waveform acquisition-X
1 or 3 Phase mode-MX30/45-3Pi
IEEE / RS232OptionX
Options
ModelRefer to table shown for model numbers and configurations
Supplied with
StandardUser Manual on CD ROM.
Pi versionUser/Programming Manual and Software on CD ROM. RS232C serial cable.
Packaging and Shipment
All MX systems are packaged in re-usable protective wooden crates for shipment.

 

 

California Instruments MX Series : Diagram

다운로드

가정용 PCS 데이터모니터링 시스템 [ 제작 및 구축 ]

가정용 PCS 데이터모니터링 시스템 구축• 설비 개요 :     - 유럽향 모델의 가정용 PCS 제품이 개발 완료, 수출 국가별(향지 별)  PCS의 새로운 모델이 지속적으로 개발/출시 예정.    - 개발 예정 모델의 경우 PCS의 제어 인터페이스가 변경 될 수 있고 이로 인해 새 모델마다 PCS 데이터 수집 장치 개발을 위한 리소스가 투입 필요.    - 개발완료 및 출시 예정 모델의 장시간 AGING 시험 및 데이터 취득을 자동화 함.     - 적용모델 : 가정용 5KW, 8KW, 10KW    - 향후 적용예정  모델 : 북미향 올인원 가정용 ESS PCS 등• 납품처 : LG전자 ESS품질보증파트, ESS PCS 개발팀• 설비 특징 및 장점 :      - 새로운 모델의 개발/출시 시 PCS제어 인터페이스가 변경될 수 있고 이로 인해 새 모델마다 PCS 데이터수집  장치 개발을 위한 리소스 투입 필요.      - PCS 모델 별로 필요한 측정 아이템을 사용자가 직접 편집하고 파일 기반으로 저장, 관리 할 수 있는 기능을 구축하여 새로운 모델에 대한        데이터 취득 시스템 리소스 투자 비용 감소.     - 기 양산 모델 뿐만 아니라 개발 예정 PCS제품들에 동일한 인터페이스를 이용하여 제품 모델에 관계없이 PCS의 데이터를 모니터링, 레코딩 할 수    있는 기능을 지원함.     

자세히 보기

가정용 ESS PCS 인정 시험 시스템 [ 제작 및 구축 ]

가정용 ESS PCS 인정 시험 시스템 구축• 설비 개요 :     - 유럽향 가정용 ESS PCS 모델의 다양한 계통환경 및 온습도 환경에 대한 모의 및  PCS 인정 시험.     - 배터리모의전원, 계통모의전원, PV모의전원, 전력분석기, 온도시험챔버,온도레코더 및 PCS를 직접 제어하여 시험 수행.     - PCS의 EVENT 발생 시 Event 시간의 전력 및 온도데이터의 Database 화 및 Post-Processing    - 적용모델 : 가정용 5KW, 가정용 8KW, 가정용 10KW     - 적용예정모델 : 북미향 올인원 PCS• 납품처 : LGE ESS품질보증파트, ESS PCS 개발팀. • 설비 장점 :      - PMS를 제어하여 PCS의 충전/방전 등을 직접 제어하여 PCS 출력에 따른 다양한 계통환경 및 온도 환경을 동기화 제어.     - PCS Event(Alarm, Error) 발생 시  Event 전/후 데이터의 고속 데이터 자동 취득으로 Event 전/후 전력아이템, 온도 등의  데이터를 동기화 기록.    - Event 전/후 고속 데이터 및 상시 운전 데이터를 데이터 베이스 이원화로 구축하여 데이터 관리 및 Post-Processing의 편의성 제공.

자세히 보기

Related Products